Raspberry Pi 3 b+ with RT3070 Overview › Forums › Pi-Tail › Raspberry Pi 3 b+ with RT3070 This topic contains 2 replies, has 2 voices, and was last updated by ThePol 10 months, 3 weeks ago. This post has been viewed 461 times Author Posts April 29, 2018 at 10:18 pm #13127 ThePolParticipant Yesterday I installed the Re4son kernel on my new Raspberry Pi 3 b+. I am trying to get aireplay-ng –deauth to work on my own network. I’ve gone through the following steps: 1) airmon-ng check 2) airmon-ng check kill 3) airmon-ng check (to make sure nothing else is running) 4) airmon-ng start wlan0 5) Tested injection with: aireplay-ng -9 wlan0mon All this seems to work but when I run: aireplay-ng –deauth 6000 -a 11:22:33:44:55:66 -c 77:88:99:11:22:33 wlan0mon The device is not kicked off the wifi. Any ideas? Output of aireplay-ng is: Sending 64 directed DeAuth. STMAC: [77:88:99:11:22:33] [ 4|46 ACKs] April 29, 2018 at 10:57 pm #13128 Re4sonKeymaster Hi ThePol, Unfortunately injection is still beta for the B+ and is very much hit and miss. I’d get my hands on a cheap dongle for the time being. Sorry for that. I’ll tweet as soon as injection is working properly. Many thanks, Re4son April 30, 2018 at 4:41 am #13130 ThePolParticipant Thank you very much for the quick response! I found a cheap alternative — Panda Wireless PAU06. It has the Ralink RT5372 chipset, which appears to support monitor mode and packet injection. I’ll let you know. Thanks again! Author Posts You must be logged in to reply to this topic.